Bimar AP11 Notice D'instructions page 17

2. Can I manage several air conditioners with just one application?
Yes. Each account is able to manage several devices, just add the new devices via
APP.
3 Can I install several smart partners at home?
Yes. The number of smart partners that can be used depends on the capacity of the
router. Please note that smart partners may not be able to identify different units if
identical models are used in the same room.
4 What is the best place to install smart partners?
a) within 5 metres of the air conditioner you want to control.
b) There must not be any barriers between smart partners and the air conditioning
unit.
5 Can I install smart partners even if it is on the same wall as the air conditioner and
not in direct line with the infra-red sensor of the air conditioner?
Yes, the infra-red light is reflected from the surfaces, in this way the signal will
bounce and hit the IR sensor.
6 How does Smart Partner work?
The user must connect Smart Partner to the Wi-Fi network. During configuration
(the default password is 123456), you must pair the device with the remote control.
The infra-red remote control codes are in the cloud, making it easy to pair. You can
then start using the device. Smart Partner must be connected to the Wi-Fi network
at all times so that the it can always be reached by remote control via the cloud.
7 How can I reset Smart Partner?
Press and hold the reset button for 5 seconds until the LED starts to flash red, after
which you can proceed with a new installation
8
Failure to set up the smart partner.
a) Check that the router is for home use (i.e. no access restrictions other than
password)
b) Check that the Wi-Fi router connected to the smart phone operates at 2.4 GHz.
The device does not support 5 GHz Wi-Fi networks.
c) Check that the Wi-Fi password is correct
d) Check the strength of the Wi-Fi signal
e) Reset Smart Partner by pressing the reset button and try again.
9 Smart Partner loses connection during use.
a) Check if there is a strong enough Wi-Fi connection to connect to the internet in
the chosen position.
b) If the router has been reset or the Wi-Fi password has been changed, reset the
smart partner and repeat the set-up.
10 How can I share the device with my family?
Install the application on your family members' devices, select the "+" key and then
the "configured device" key, then enter the serial number (on the side of the device)
and the password can be used.
11 Does the original remote still work after using Smart Partner?
Yes.
12. If I want to use smart partner with another air conditioner, do I have to reset the
device?
No, you do not need to reset the device. You can pair the remote control of the new
air conditioner with the APP, after which Smart Partner will control the new device
instead of the old one.
13. How does the timer work?
The timer simply switches the device on or off using the last mode set by the user.
14. How does the Automatic sleep mode work?
17