Spray Gun Overview; Contents - Unpacking - 3M Accuspray HGP Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15

Spray Gun Overview

3M™ Accuspray™ Spray Guns were designed from the inside out for the effective, efficient, and
economical application of paints, adhesives, coatings and finishes. This spray gun has a large spray
pattern with very low overspray. The soft, tight, adjustable pattern with complete atomization results in a
high finish quality and absolute control. Each ultra-light weight spray gun is designed for easy handling,
reliability and durability and for minimum maintenance costs. Combine your 3M™ Accuspray™ Spray Gun
with the 3M™ PPS™ Paint Preparation System and enjoy additional savings of time and cleaning solvents.
3M™ Accuspray™ Spray Gun is for professional use only. Hazards can occur from equipment misuse. Any
misuse of the equipment or accessories, such as over pressurizing, modifying parts, using incompatible
chemicals and fluids, or using worn or damaged parts can cause serious bodily injury, fire, explosion or
property damage.
Read and follow all Safety Statements and Instructions.

Contents - Unpacking

Remove the components from the box. Inspect for concealed damage and/or missing items. If you discover
any damage and/or missing pieces, contact your distributor immediately.
Your 3M™ Accuspray™ Spray Gun Kit includes:
• 4 Atomizing Heads
• Spray Gun Body
• Air Flow Control Valve
• Spray Gun Manual
3M™ Accuspray™ Spray Gun
The 3M™ Accuspray™ Spray Gun features a black composite*
body, 10 cfm (285 L/min) air consumption, 1/4" (1/4" BSP)
air inlet and 20 psi (1.4 bar) maximum inlet pressure with full
trigger pull **. This spray gun is for use with compressed air
systems and the PPS™ Type H/O Pressure Cups.
* Product material compatibility information available upon request.
** Maximum inlet pressure at a 2:1 reduction ratio will yield
approximately 10 psi (0.69 bar) at the air cap and 15 psi at the
pressure port. NOTE: Exceeding 15 psi air inlet could cause the
pressure relief valve at base of PPS™ Type H/O Pressure Cup to
open and relieve excess air pressure.
7

Publicité

Table des Matières
loading

Table des Matières