ENGLISH
B. Two or more units in master/slave setup:
Connect 2 or more units together. Refer to the chapter "electrical installation" to learn how to do this.
Set the master mode for the first unit and select one of the shows.
Set the slave mode for all the other units: each slave projector can be set to its specific slave mode
(see chapter HOW TO SETUP the slave mode)
Connect all units to the mains and put on some music. The units will start working automatically to the
rhythm of the music and show the internal programs.
Don't forget to set the Blackout mode of the Master unit to 'NO Blackout' or nothing will
happen.
Don't forget to set the Sound mode of the master unit to [ON] if you want the unit to be
controlled by the beat of the music.
Remark: You can connect a CA-8 remote controller to the master unit if you want to have more control
over the master/slave operation.
C. Connect the optional CA-8 controller for more control:
The CA-8 controller can only be used in standalone or master/slave mode. Connect the controller to the
CA-8 input of the first unit (master). Now you can control all the connected units:
BUTTON
STANDBY
1.Synchronous strobe
FUNCTION
2.Two light strobe
3.Sound strobe in color
MODE
D. Controlled by universal DMX-controller:
Connect all the units together. Refer to the chapter "Electrical installation for two or more units in DMX-
mode". To learn how to do this (don't forget to address all the units properly!)
Connect all the units to the mains and turn on the DMX controller.
Since each unit has its own DMX-address, you can control them individually. Remember that each unit
uses 1 or 9 DMX-channels as shown in the DMX charts below:
1 CHANNEL MODE
DMX
DMX-
Channel
value
000-007
008-027
028-047
048-067
068-087
088-097
1
098-117
118-137
138-157
158-167
168-247
250-255
JB SYSTEMS
®
Strobe
(LED OFF)
function
OFF
Static Red
Static Green
Static Blue
Static White
Slow rotating color 1
Slow rotating color 2
Slow rotating color 3
Slow rotating color 4
Slow rotating color 5
Slow rotating color 6
SOUND
ACTIONS
To blackout the unit
Show selection
Show
(LED ON)
8/54
USER MANUAL
Not Used
(LED BLINKING)
remarks
EFFECT OFF
STATIC color
Static color
SLOW movements
RANDOM SOUND MODE
DYNABARREL