Select Modes; Adjust The Volume; Adjust The Brightness; Factory Reset - Grundig MS 300 Mode D'emploi

MAIN OPERATION ____________________________
Standby/ON
When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the
button on the remote control or on
the main unit to switch the main unit ON.
• Press the
button on the remote control or on
the main unit to switch the main unit back to
Standby mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit off
completely.
Tips:
• If there is no signal input under the DISC, USB,
BT (Bluetooth), SD, CASSETTE or AUX mode,
the unit will automatically switch off within 15
minutes.

Select Modes

• Press the
button on the unit or MODE button
on the remote control to select the desired
mode.
• The selected mode FM, DISC, USB, SD, BT, AUX,
CASSETTE will show on the display.

Adjust the Volume

• Press the
/ buttons on the remote control
or rotate VOL+/- knob on the unit to adjust the
volume.
• If you wish to turn the sound off, press the
button on the remote control. Press the
button again or press
normal volume.
Select Equalizer (EQ) Effect
• Press the POP - CLASSIC - ROCK - FLAT buttons
on the remote control to select the Equalizer.

Adjust the Brightness

• Press the DIMMER button on the remote control
to select brightness level.
(low/mid/high)
/ buttons to resume
Set the Sleep Timer
This unit can switch to standby automatically
after a set period of time.
1 Press the
button on the remote control
repeatedly to select your desired number of
minutes. The number of minutes shown will
display in this sequence:
SLEEP120 SLEEP 90
SLEEPOFF SLEEP 15
2 Stop pressing the
desired number of minutes is displayed. The
sleep timer is now set.
• Press the
button to view the remaining time
before switch off.
• To cancel the sleep timer, press the
repeatedly until "SLEEPOFF" shows on the
display.

Factory Reset

• Reset device to default setting.
1 In ON mode, press MENU button on the
remote control to entering system menu setup.
2 Press
/ buttons on the remote control
to select RESET and then press OK button to
entering reset setting.
3 Press / buttons to select Y and then press
OK button to reset the factory default settings.
• The main unit back to Standby mode.
AUX Operation
Play for External Audio Devices
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the MODE button on the unit or on the
remote control to select the AUX mode.
3 Operate your audio device directly for
playback features.
4 Press the VOL+/- buttons to adjust the
volume to your desired level.
SLEEP 60
SLEEP 30
button when your
button
ENGLISH 39