Place the feeding tube (2) so that the symbol
the symbol
on the middle part (7). Press it down and rotate clockwise, so that the
symbol
on the feeding tube (2) is above the symbol
Place the pusher (1) into the lid with feeding tube (2). Place
the residue container (10) under the outlet for residues (7a)
and the juice container (11) under the outlet for juice (7b).
To disassemble arrange these steps in reverse order.
But you can lift the middle part with juicing strainer or sorbet
strainer, wiper basket and pressure auger together and then
disassemble them.
Please note
► The device may leak if the lock of juice outlet is not closed
properly.
► Device will not operate if parts are not assembled properly.
► The pressure auger must be latched, so that the feeding
tube with lid can be closed.
14.4 Switch
ON: Starts the pressure auger, it pulls the food down.
OFF: Stops the operation
REV: Pushes the food back up
14.5 REV-function
When the pressure auger is blocked or the feeding tube cannot be disassembled, then use
REV-function. The REV-function loosens blocked food by pushing it back up.
Let the device stop completely before switching to REV position again.
on the feeding tube will be place above
on the middle part (7).
38