Product Description And Connections; Pcb Board - Eneo GXB-1720MIR Mode D'emploi

Product description and connections

1. PCB Board

1. Plug Inlet: An AC 24V inlet that connects to an external power supply.
2. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for
10/100 Mbps Ethernet networks. PoE (Power over Ethernet) function:
Provides power to the device via the same cable as used for the net-
work connection.
3. Plug Inlet: A DC 12V inlet that connects to an external power supply.
4. GPIO: This is a 6-PIN connector including the Digital output/input,
DC output and GROUND items for connecting with external devices.
5. VIDEO OUT Connector: The connector provides the unit's composite
video signals to a monitor. (This connector adjusts and improves the
images.)
6. AUDIO IN: The connector is used to connect the audio output from
other devices to the camera.
7. USB port: The user can use a USB device cable to connect the
IP camera to the USB port on the PC.
8. AUDIO OUT: Provides the camera's audio signal to a speaker or stereo.
9. SD/ SDHC CARD slot: This is used for system software updating and
archiving / accessing critical images.
10. RESET: Recover to factory default.
14