Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SK135
Maintenance
A cleaning needle (12) and lubricant tube (13) are supplied with this product and stored in the back. Fill
the lubricant tube with suitable lubricant, e.g. silicone grease.
13
Press the latches together and remove the
cleaning needle (12) and lubricant tube (13) from
the product
12
Remove any dirt deposits from the nozzle hole
using the cleaning needle (12)
12
12
© NØRSE
English
13
12
Push the cleaning needle (12) and lubricant tube
(13) back into the opening after each use.
Remove the quick connector filter (4) from the
water inlet (5). Use a damp tool to disassemble
the quick connector filter (4). Rinse the parts with
clean water.
04
Publicité
Chapitres
Table des Matières
Dépannage
