Detergent; Surface Preparation; Detergent Application - NORSE PROFESSIONAL SK135 Manuel D'utilisation

SK135

Detergent

Use the detergent setting to apply detergent. Some cleaning tasks can be completed with water alone,
but for most tasks the removal of dirt becomes more effective if a detergent is used.
NOTE: Only use mild, environmentally friendly detergents. Never use aggressive chemicals, abrasive
detergents or similar to avoid damage to your health, the product and the environment.
Unscrew the cap (7b) to open the tank (7c) and fill
with suitable detergent
WARNING! Avoid skin contact with detergents, in particular contact with eyes! If detergent
gets in your eyes flush your eyes with clean water and seek immediate medical attention!
The following cleaning procedure will ensure that you achieve the most beneficial results in the shortest
amount of time.

• Surface preparation

Clear the working area and make sure that all windows and doors are closed tightly. Make sure that all
plants and trees adjacent to the cleaning area are protected by a drop cloth.
• Initial high pressure rinse
The next step is to spray the cleaning surface with water to clear off any dirt or grime that may have
collected on the surface. If you use detergent, this will allow your detergent to attack the dirt that has
worked its way into the cleaning surface.

• Detergent application

Only use detergents formulated for pressure washers. Test the detergent in an inconspicuous area before
use. Follow the manufacturer's label directions for mixing the correct concentrations of detergent to
water.
8
07b
07c
Screw the cap back onto the tank.
Adjust the detergent flow with the regulator (7a) on
the cap (7b)
© NØRSE
English
07a
07b