Using Your Stroller - Evenflo LUX 24 Instructions

ASSEMBLING YOUR STROLLER
3
J
I
4
K
L
To attach child tray assembly, push tabs into
K
openings on stroller. Make sure tray locks into
L
position with audible clicks. Pull on the child tray
assembly to make sure it is locked into place.
6
O
4
Turn the stroller so the front of the stroller is facing upwards,
as shown.
Slide a front wheel assembly into the front frame leg
I
until it locks into place with an audible click. Pull downward
on the front wheel assembly to make sure it is locked
securely.
Repeat for other side.
Turn the stroller right side up onto its wheels.
5
M N
To attach cup holder , slide down on the side mount
M
shown, until it locks into place with an audible click. Pull on
the cup holder to make sure it is locked into place.
NOTE: Cup holder is not available on all models.
To attach visor, start zipper as shown. Zip visor closed.
O
Once visor is attached, make sure zipper pull tab is stored in
zipper pocket , as shown.
P
P
1
J
2
, as
N
3
D
Step on the rear brake levers
the stroller.
To release the brakes, lift up on the brake levers.
A
To keep front wheels from swiveling, lift tab
wheel assembly . Push tab down to allow front wheels to
C
swivel.
NOTE: The locked position is recommended for travel over
uneven surfaces.
LOCKED
B
C
To open the child tray assembly
on either side of the tray.
Note: You can open the tray from either side.
D
E

USING YOUR STROLLER

to lock the rear wheels on
A
on front
B
NOT LOCKED
B
, push the locking tab
D E
To remove the child tray
assembly , push both tabs
D E
and remove the tray from the
stroller.
5