Using Your Stroller - Evenflo JourneyLite Instructions

ASSEMBLING YOUR STROLLER
4
L
A
5
M
N
6
P
Q
4
Turn the stroller upside down.
Hold the rear wheel/axle assembly so the brake levers
toward the handle and console.
Slide the brake housings onto the stroller A until they lock
into place with audible clicks.
Pull upward on the rear wheel/axle assembly to make sure it
is locked securely.
Slide the front wheel assembly M over the front frame leg
until the locking tab locks into place with an audible click.
O
Pull on each front wheel assembly to make sure it is locked
securely. Repeat for other side.
Note: To remove each swivel wheel, press locking tab
slide the wheel off the leg.
O
Turn stroller right-side up on its wheels. Insert the canopy
support tubes P into the canopy hinges Q on the stroller
until they lock into place with audible clicks.
Pull upward on the canopy tubes to make sure they are
locked securely.
P
Q
7
R
L face
S
8
N
U
O and
V
1
A
2
Bring the parent's console R up to the parent's handle
Gently pull out one end of the console and guide the hole
over the post T . Repeat with the other end of the parent's
console.
B
T
Bring child's tray U up to front of stroller. Gently guide
child tray's posts into holes in stroller
V
in place with audible clicks. Pull on the child's tray to make
sure it is locked in place.
W
Pull canopy hoop forward to extend canopy.
A
Push canopy toward handle to close.
Step on the rear brake levers
the stroller.
To release the brakes, lift up on the brake levers.
B
ASSEMBLING YOUR STROLLER
B .
S
until they lock
W

USING YOUR STROLLER

B to lock the rear wheels on
5