Optional Accessories; Spécifications - Makita LXT211 Manuel D'instructions

the tool and break in brushes by running the tool with no
load for about 1 minute. Then check the tool while
running and electric brake operation when releasing the
switch trigger. If the electric brake is not working well,
ask your local Makita service center for repair.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use the accessories or
attachments for their stated purposes.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Drill bits
•
Tungsten-carbide tipped hammer bit
•
Phillips bit
•
Slotted bit
•
Socket bit
•
Blow-out bulb
•
Safety goggles
•
Various type of Makita genuine batteries and
•
chargers
Hook
•
Bit holder
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
FRANÇAIS (Mode d'emploi original)
SPÉCIFICATIONS
Modèle
Capacités
Vitesse à vide (T/MIN)
or attachments
Béton
Acier
Bois
Vis à bois
Vis de mécanique
Grande (2)
MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested
before leaving the factory. It is warranted to be free of
defects from workmanship and materials for the period
of ONE YEAR from the date of original purchase.
Should any trouble develop during this one year period,
return the COMPLETE tool, freight prepaid, to one of
Makita's Factory or Authorized Service Centers. If
inspection shows the trouble is caused by defective
workmanship or material, Makita will repair (or at our
option, replace) without charge.
This Warranty does not apply where:
repairs have been made or attempted by others:
are
repairs are required because of normal wear and
tear:
the tool has been abused, misused or improperly
maintained: alterations have been made to the
tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY
INDIRECT,
DAMAGES FROM THE SALE OR USE OF THE
PRODUCT. THIS DISCLAIMER APPLIES BOTH
DURING AND
WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED
WARRANTIES, INCLUDING IMPLIED WARRANTIES
OF "MERCHANTABILITY" AND "FITNESS FOR A
SPECIFIC PURPOSE," AFTER THE ONE YEAR
TERM OF THIS WARRANTY.
This Warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
Some states do not allow limitation on how long an
implied warranty lasts, so the above limitation may not
apply to you.
EN0006-1
LXT211
13 mm (1/2")
13 mm (1/2")
38 mm (1-1/2")
10 mm x 89 mm (3/8" x 3-1/2")
M6 (1/4")
0 - 1 500 /min.
12
INCIDENTAL OR CONSEQUENTIAL
AFTER THE TERM OF THIS
LXT211A
13 mm (1/2")
13 mm (1/2")
38 mm (1-1/2")
6 mm x 75 mm (1/4" x 2-15/16")
M6 (1/4")
0 - 1 500 /min.