Direct Mount Hardware Removal Or Assembly - Permobil ROHO Agility Max Mode D'emploi

Direct Mount Hardware Removal or Assembly

Removing the Direct Mount Hardware
Follow these instructions if you need to remove or assemble the Direct Mount Hardware for storage or another reason.
1. Place the AGILITY
with the Direct Mount
Hardware onto a
stable, level, sturdy
surface
2. Loosen and remove all four nylon-insert lock nuts and washers.
Assembling the Direct Mount Hardware
1. Place the wing bracket onto the center bracket. The oval-shaped
keyhole openings should face up.
2. Insert the four screws into the holes.
3. Use an Allen wrench to tighten the screws
until snug + one-quarter turn.
Note: Reverse this process to separate the wing bracket from the
center bracket.
ROHO AGILITY Direct Mount Hardware Operation Manual
3. Remove
the Direct
Mount
Hardware
from the
AGILITY
back
shell.
4. Replace the washers and the
lock nuts.
12
5. Tighten the lock nuts.
Wing Bracket
Center Bracket