Working Range - FUXTEC FX-BV140 Mode D'emploi

9. Stop the tiller blades when the machine is to be tilted so that it can be transported to other areas.
10. Never use the tiller with a defective guard or guard grille without an attached device that is mounted as a
buffer or moss/grass collection basket.
11. Do not change the set engine control. Do not change it under any circumstances.
12. Start the engine carefully. Keep a sufficient distance between your feet and the tiller.
13. Start the engine. The tiller must not be tilted, even if it is to be lifted during the process. Only tilt as far as
necessary and only lift it from the rear (user side).
14. Never reach with hands or feet behind or under the rotating elements. Always keep a distance from the
ejection area.
15. Never lift the tiller and never carry it with the engine running.
16. Switch off the engine and pull out the spark plug connector before removing blockages blocking the
ejection area:
- Before releasing the blockages or removing blockages in the ejection area.
- Before removing the collection bag or before checking, cleaning, or working on the milling machine.
- After hitting an obstacle, before recommissioning and starting work, check for damage to the milling
machine and carry out any necessary repairs. If the milling machine starts to vibrate unusually, it
should be checked immediately.
17. Switch off the motor:
- If you move away from the milling machine.
- Before refueling.
18. When turning off the engine, the ignition switch must be in the OFF position (position OFF or O). The fuel
tap position must be changed to OFF or O.

WORKING RANGE

Keep the work area clean and well exposed. Cluttered and dark areas cause accidents.
1.
Check the environment in which the machine is used and remove all objects such as stones, toys, sticks,
2.
and wires that could be caught and thrown away. This can cause damage to the machine or injury to the
user.
Do not operate this machine in areas with a potentially explosive atmosphere, e.g., in the presence of
3.
flammable liquids, gases, or dust. The device generates sparks, which can ignite the dust or vapors.
4. Keep away children and people present during the operation of the machine. Distractions can cause you to
lose control.
Original User Manual FUXTEC FX-BV140_de_en_fr_ita_rev04
5