How To Use - Panasonic ES-LV6Q Mode D'emploi

How to use

This appliance has a smart lock function, so the power switch is
automatically locked to prevent accidental operation when not shaving.
► Unlocking the power switch
The lamps illuminate upwards
and the power switch is
automatically unlocked when
the main body is grasped.
• The remaining battery capacity
will be shown and then turn off
after approximately 1 second.
► Locking the power switch
The lamps illuminate downwards
and the power switch is
automatically locked 1 minute
after releasing the main body.
• The switch lock lamp ( ) will
light up for 5 seconds and turn off.
• The sensor may respond and the power switch may be unlocked
when an electrical device or metal object is brought closer. This
is not abnormal.
Shaving beard
1
Press and shave�
• The "shaving sensor", which automatically
adjusts the power depending on the beard
thickness, will operate.
It will shave with high power on areas where
the beard is heavy, and reduce the power on
areas where the beard is thin, to reduce
burden on the skin.
ES-LV6Q_US.indb 11
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
• The beard under the chin and around the
throat can be shaved better by stretching
the skin so the beard will stand.
• To prevent damaging the system outer
foil, do not shave with only a part of the
system outer foil.
2
Press when finished.
While using
The used time and remaining
battery capacity are shown and
then turn off after 7 seconds.
• The shown time returns to
[0'00"] after 10 minutes.
• The shaving sensor lamp
( ) blinks.
After use
The used time and remaining
battery capacity blink
alternately and then turn off
after 8 seconds.
11
2018/03/02 15:53:07