Product Operation - Royal Sovereign RWD-200W Guide D'utilisation

PRODUCT OPERATION

1. Insert the power plug into the wall socket.
2. First, turn the Hot Water switch on the back of the unit into the ON position. Next,
turn the Cold Water switch into the ON position. DO NOT TURN ON BOTH
SWITCHES AT THE SAME TIME. Once this is completed both cooling and heating
indicator lights should light up.
NOTE: This appliance is designed to provide hot or cold water whenever you need it. It
will automatically turn on and off when hot and cold water reaches the desired
temperatures.
When operating the water dispenser for the first time, you will need at least 15-30
minutes for the hot water to reach the desired temperature and 1 hour for the
cold water to reach the desired temperature.
The water dispenser has 2 indicator lights on the front panel.
•
When the right indicator light is on, the unit is in the process of cooling water inside the
cooling tank.
•
When the left indicator light is on, the water dispenser is heating water inside the heated
water tank.
Using the Water dispenser
•
To dispense HOT water, press the hot water safety button and then push the hot water lever
down.
•
To dispense COLD water, push the cold water lever down.
•
It is recommended that if the hot water option is not used, the hot water button (red button) be
turned OFF. This will help conserve energy.
5