Product View / Set-Up - Royal Sovereign RWD-200W Guide D'utilisation

PRODUCT VIEW / SET-UP

BEFORE PLUGGING IN THE UNIT TO A POWER SOURCE:
1. Let the appliance stand upright for about 24 hours. This will reduce the chance of malfunction in the
cooling system from possible mishandling during delivery.
WARNING: The drain cap on the back of the unit may become loose during shipping. Fasten the
drain cap tightly before you start to operate the unit. If the drain cap is loose, the unit may leak and
cause floor damage.
2. Insert water bottle vertically through the water funnel.
3. Place a container under the hot and cold water taps then push down on both levers to test if water is
flowing through the unit. To use the hot water lever, first press the hot water safety button before
pushing down on lever.
WARNING: Before plugging and switching the appliance ON to heat, Make sure to have poured
water from the hot water faucet. IF THE DISPENSER IS TURNED ON WITH AN EMPTY WATER
TANK, IT CAN BE DAMAGED.
4