Milnor E-P Plus Manuel D'utilisation page 11

usually be corrected at the operator controls.
RECOVERY: Press
or another message appears on the display, request authorized service.
RECOVERY: Press
RECOVERY: Close the door. Press
processing and request authorized service.
—These errors usually require accessing program data and procedures found in the reference manual.
RECOVERY: Request management assistance to reconfigure the machine, reinstall the standard
formulas, and reprogram the wash formulas. Return to run mode to resume operation.
usually require accessing mechanical or electrical components. Request authorized service in
accordance with published safety information. See the safety manual.
RECOVERY: Request authorized service.
RECOVERY: Request authorized service.
The three-wire relay supplying control circuit power to the machine was
de-energized or power was restored to the machine after a shutdown or
power loss.
to close the three-wire circuit. If the three-wire circuit remains disabled
Accumulator data is unreliable.
to clear accumulator data and resume operation.
The door input was not actuated.
to resume operation. If the message returns, suspend
Configure data or program data was corrupted.
The microprocessor could not read from or write to the EEPROM.
The level switch malfunctioned.
7
<B>D9DCB04 (#"%0E
—These errors can
—These errors