Fermax iLOFT BUS2 Manuel D'installation Et Utilisation page 28

iLOFT Monitor iLOFT Monitor
iLOFT Monitor iLOFT Monitor
iLOFT MONITOR SETTINGS
Volume Settings and Tone Selection
90 sec.
- Accessing «Volume Settings» Mode: Press and hold the «
(the led flashes once per second and the dial tone sounds via the main panel).
The iLoft monitor has 5 different volume levels:
- press the
- press the
Once the lowest or highest volume levels have been reached a double beep will
sound indicating that you reached the minimum or maximum levels.
- Accessing «Tone Selection» Mode:
Tone for calls coming from the Main Panel:
While in «volume settings» mode press the «
ring tone again.
- press the
- press the
Tone for calls coming from the Secondary Panel:
While in «Tone Selection Mode for the Main Panel» press the «
hear the main panel ring tone again.
- press the
- press the
- Exit «volume settings and tone selection»
While in «Tone Selection Mode for the Secondary Panel» press the «
you hear the long confirmation tone.
Page 28
: Volume Settings
(5 sec.)
: Main Panel Tone Selection
: Secondary Panel Tone Selection
: Exit Settings
button to increase the volume.
button to reduce the volume.
button to select the next ring tone.
button to select the previous ring tone.
button to select the next ring tone.
button to select the previous ring tone.
» button for 5 seconds.
» button until you hear the main panel
» button until you
»button until