Dalla Corte evo2 Notice Pour L'utilisateur page 57

At this point, the programming of the first day can
be copied to other days.
• Use (PD1) and (PD2) to highlight the menu '4-9
Copy', then push (PD3) to access this menu.
4-9 Copy
By default, Monday is the day of origin and Tues-
day the day of destination; it is therefore sufficient
to push repeatedly to copy all the days to be pro-
grammed.
• Push ESC to go back to menu 4.
In case a different programming for each day is
needed, repeat step 4-2 for each day. To program
a day of inactivity, just leave all on/off settings on
00.00 on that day.
• Once timer programming has been completed,
push ESC to go back to main menu.
57