Dalla Corte evo2 Notice Pour L'utilisateur page 52

2-5 Temperatures
This menu displays the real-time temperatures
of groups, boiler and MCS milk probe, if installed.
WARNING
These temperatures shall be read when the
groups have been inactive for at least 5 minutes
after the latest extraction, otherwise the tempe-
rature displayed cannot be considered reliable.
• Push (PD3) to access this menu.
• Use (PD1) and (PD2) to scroll through all the
above-mentioned temperatures.
• After getting the needed info, push ESC to go
back to the INFO Menu.
2-6 Cycle counters
This menu allows to display the counters of the
52
working cycles of each electromechanical com-
ponent in the machine.
• Push (PD3) to access this menu.
• Use (PD1) and (PD2) to scroll through all the
counters of the main units.
• After getting the needed info, push ESC to go
back to the INFO Menu.
2-7 Grinder (GCS)
This menu allows to see if connection to grinder(s)
works properly.
• Push (PD3) to access this menu.
• At the end, push ESC to go back to the INFO Menu.