Dalla Corte evo2 Notice Pour L'utilisateur page 56

• Use (PD1) and (PD2) to choose the day to be
programmed and push (PD3) again to access the
programming.
4-2 Monday
• Push (PD3) to access boiler pro-gramming and
(PD3) again to highlight its turn-on time.
• Use (PD1) and (PD2) to set the turn-on time, then
push (PD3) to confirm it.
56
• Once the setting has been confirmed, the next
one will be automatically highlighted. Use (PD1)
and (PD2) to set the turn-off time, then push (PD3)
to confirm it.
• Once the setting has been confirmed, the next
one will be automatically highlighted. Use (PD1)
and (PD2) to select the machine mode to be ena-
bled outside the set working time. Push (PD3) to
confirm.
NOTE
It is possible to set 2 options:
• An OFF mode (OFF) - the unit is turned-
off completely.
• A SAFETY mode (SAF) - the unit is kept
at a safe, energy-saving temperature.
• Once the setting is confirmed, the next unit to
be programmed will be automatically highlighted.
Use (PD1) and (PD2) to choose another unit to
be programmed and repeat the above-mentioned
steps.
• Once the programming is over and the last set-
ting has been confirmed, menu 4 will be automa-
tically displayed.