Zephyr Siena ZSI-E30CS Guide D'utilisation, D'entretien Et D'installation page 16

Installation Instructions
Horizontal Ducting Conversion
16
3. Attach rectangular or round duct
collar to interior of hood body by
(4) screws.
4. Attach rear ducting brackets to
motor by (4) screws.
5. Position blower with brackets as
shown. Be sure to tuck back of
blower bracket into tabs at back
of hood. Secure single blower
plate to back of hood using (4)
screws removed from step 2.
Siena Use, Care, and Installation Guide
C O R E
S I E N A
WA L L