JCM 2000-CODE MAIN UNIT-DCS Mode D'emploi page 22

Note: in the hypothetical case of the controller's memory being affected by an
!
unusual external factor, it will work normally except that when you press a channel
by means of a transmitter, whether in programming or function mode, it will
give out a series of bleeps which will inform you of
8. CODE REPLACEMENT
This function enables you to cancel any lost or robbed transmitter, smart card
or proximity key, using the same codes and without the necessity of having the
receiver present in order to cancel the lost code. By means of a MANAGER or
MINIMAN portable programmer and knowing the code, you can change the
"Replacement Number", from "0" to "7" for transmitters (0 is the first remote
control delivered by the factory, and 7 the last "replacement" before setting
the code as obsolete in the installation). In the case of smart cards or proximity
keys, this function can only be activated with the MANAGER portable programmer, and
goes from "0" to "3". Therefore, it is only possible to carry out 3 more replacements
starting from the original card or key. The system permits such "replacements" from a
new smart card or proximity key, changing the code and "Replacement Number" (see
MANAGER portable programmer manual). Emitting the code to the receiver, the new
replacement number will cancel the previous one and will be automatically updated.
In the installation, the user must activate the transmitter twice. The first time,
the receiver updates the new element and cancels the previous one. The second time,
the receiver activates the corresponding operation in the receiver. In case of access control
elements such as smart cards and proximity key, the user will only have to activate once
and both actions will be realised at the same time.
9. USE OF THE MAIN UNIT
This controller is intended for use as a remote control for garage doors, to give the order
for movement to switchboards and connection/disconnection of alarms. Its USE for
directly working equipment other than that specified is not guaranteed.
23
the malfunction.