optrel medmaxx Mode D'emploi page 4

Hints
Correct
!
Use a pencil
There is a hint how you get the plates rightly assembled ( tted on the bolt with the
notch and not in the threaded area), you only need a pencil - use it as shown in the
drawing below (green marked space on the headband).
Pencil
!
In case of an accidental disassemble of all parts, use the sequential arrangement below
4.
7.
6.
5.
3.
Cover lens
Left
Hints before we start
Wrong
Move the bolt to the
middle position
2.
1.
Put a pencil in between the gap to
ensure that the bolt will stay up to
assemble your plates.
1.
Cover lens
4
!
Make sure that none of the
parts is in the threaded area,
and all plates are guided by
the notch.
Pencil
3.
4.
2.
5.
6.
Right