Reference - Samsung DVD-1080P9 Manuel D'utilisation

reference

Firmware upgrade
Introduction
Upgrading the Firmware will keep your DVD player
up to date.
The latest firmware version for this unit is provided
on the Samsung Website.(www.samsung.com).
How to make an upgrade disc
You must burn the latest firmware version onto a
blank CD-R or CD-RW disc:
1. Download a new file from Samsung's website
(www.samsung.com) Download Center.
2. Write the file to Disc using the CD-RW drive of
your computer.
Note
The CD should be burned following the specs
below.
- File System CD-ROM ISO Level.
- Character set ISO 9660.
- The burned CD has to be Finalized.
- Please burn the CD at a low speed.
Upgrade procedure
1. Open the disc tray of your DVD1080P9.
Place the burned disc on the tray. Close the tray.
The Firmware upgrade screen will appear.
Upgrade file detected
Curent version: 08.09.06.00.108P9/XER
New version: 08.09.09.00.108P9/XER
Press Play to start
Firmware upgrade
menu appears
2. Press enter or play to start upgrade.
- Press any other key to cancel upgrade back
to Samsung logo and eject the disc.
Upgrade file detected
Curent version: 08.09.06.00.108P9/XER
New version: 08.09.09.00.108P9/XER
Press Play to start
File Copying
Upgrade file detected
Curent version: 08.09.06.00.108P9/XER
New version: 08.09.09.00.108P9/XER
Upgrade ?
Upgrading
- During the firmware upgrade process, the
tray will open.
Please remove the disc and wait for about
2 minutes.
- If the DVD player was successfully updated,
the disc tray will close and the unit will turn
off and on.
When the unit turns on, the Select Menu
Language screen will appear.
3. Press the number buttons to select the
desired language.
Note
- If the "Select Menu Language" doesn't
appear, please contact Samsung
Customer Service.
- Do not press any button or unplug the
power cord during the upgrade.
- The upgrade procedure may change, refer
to the web site (www.samsung.com).
- When software is upgrade, video and audio
settings you have made will return to their
default (factory) settings. We recommend
you write down your settings so that you can
easily reset them after the upgrade.
Firmware upgrade starts
Select Menu Language
Press 1 for English
Touche 2 pour Français
Drücken Sie 3 für Deutsch
Pulsar 4 para Español
Premere 5 per Italiano
Druk op 6 voor Nederlands
English _61