Bluetooth - Samsung HW-J355 Manuel D'utilisation

BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!
+ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1. Press the (
) button on the main unit's top panel
or the (SOURCE) button on the remote control
to select the BT mode.
You will see BT READY on the front display of the
●
Soundbar.
2. Select the Bluetooth menu on the Bluetooth device
you want to connect. (Refer to the Bluetooth
device's user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
●
4. Select "[Samsung] Soundbar J-Series" from the
list.
When the Soundbar is connected to the
●
Bluetooth device, it will display [Bluetooth Device
Name] BT on the front display.
The device name can only be displayed in English.
●
An underline " _ " will be displayed if the name is
not in English.
If the Bluetooth device has failed to pair with the
●
Soundbar, delete the previous "[Samsung]
Soundbar J-Series" found by the Bluetooth device
and have it search for the Soundbar again.
If the Soundbar is in another mode (except TV
●
mode), you can shift it to Bluetooth mode using
your smart device.
5. Play music on the connected device.
You can listen to the music playing on the
●
connected Bluetooth device over the Soundbar.
In BT mode, Repeat functions are not available.
●
For some Bluetooth device, Play/Stop/Next/Prev
function are not available.
Bluetooth device
If asked for PIN code when connecting a
●
Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired at a
●
time.
The AVRCP feature is supported.
●
Once you have turned off Soundbar and the
●
pairing is disconnected, the pairing will not be
restored automatically. To reconnect, you
must pair the device again.
The Soundbar may not perform Bluetooth
●
search or connection correctly under the
following circumstances:
If there is a strong electrical field around
-
the Soundbar.
If several Bluetooth devices are
-
simultaneously paired with the Soundbar.
If the Bluetooth device is turned off, not in
-
place, or malfunctions.
Note that such devices as microwave
-
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
The Soundbar supports SBC data (44.1kHz,
●
48kHz).
Connect only to a Bluetooth device that
●
supports the A2DP (AV) function.
You cannot connect the Soundbar to a
●
Bluetooth device that supports only the HF
(Hands Free) function.
Once paired the device, on D.IN/AUX/USB
●
mode, select "[Samsung] Soundbar J-Series"
from the list will automatically change to BT
mode.
15
FUNCTIONS
Connect