MasterCraft 068-0558-4 Guide D'utilisation page 8

6
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0558-4 | contact us 1-800-689-9928
6. Attach the bottom panel (Part 1) to
the left panel (Part 4), right panel (Part
3), front frame (Part 2) and bottom back
panel (Part 6). Line up the screw holes,
insert eight M4 x 10 screws (Part 22)
into the screw holes and tighten them
using the screwdriver (Part 21) (see Fig.
F).
Note:
Only the centre holes of the left panel,
right panel, front frame and bottom back panel
are used for attaching the bottom panel. Other
holes are reserved for corner bumpers.
7. Attach swivel wheels with brakes
(Part 17) and swivel wheels without
brakes (Part 18) to the bottom of the
cabinet. Make sure the swivel wheels
with brakes are installed at the front.
Insert 16 M8 x 18 screws (Part 24) into
the four swivel wheels and tighten them
using the screwdriver (Part 21) (see Fig.
G).
8. Attach the bumpers (Part 19) to the
bottom four corners of the cabinet.
Insert 16 M4 x 18 screws (Part 25) into
the bumpers and tighten them using the
screwdriver (Part 21) (see Fig. H).
Note:
After finishing this step, turn the cabinet
to upright position.
headline bars headline bars headline bars headline bars
Fig. F
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes notes notes
Fig. G
warnings warnings warnings warnings
Fig. H