Assembly Preparation - MasterCraft 068-0558-4 Guide D'utilisation

4
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0558-4 | contact us 1-800-689-9928

ASSEMBLY PREPARATION

• Assemble the storage cabinet on a clean, level surface.
• Remove all items from the packaging box and ensure that all parts listed on page
3 are included.
• When installing parts that have more than one screw, tighten all screws by hand
before tightening them with the screwdriver provided.
ASSEMBLY INSTRUCTIONS
1. Open the cardboard box to remove
the solid wood board (Part 10) and
other parts (see Fig. A).
2. Place the front frame (Part 2) on
the front of the solid wood board (Part
10). Insert two M4 x 10 screws (Part
22) through the front frame and
tighten them using the screwdriver
(Part 21) (see Fig. B).
Note:
The screw holes have some tolerance.
Always make sure that the top and sides of the
front frame align with the solid wood board.
Doing so will prevent the need to make
adjustments at the final stage, therefore
reducing time to assemble.
headline bars headline bars headline bars headline bars
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes notes notes
Fig. A
warnings warnings warnings warnings
Fig. B