MasterCraft 068-0558-4 Guide D'utilisation page 10

8
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0558-4 | contact us 1-800-689-9928
13. To insert the drawer, pull out the
drawer tracks (1) and ball bearing
tracks (2) as far as possible (see Fig. M).
14. Fit the drawer tracks inside the
track attached to the left panel (Part 4)
and right panel (Part 3). Repeatedly
push and pull the slider until the drawer
is installed in the cabinet. Finally, place
the drawer mat (Part 16) inside the
drawer (see Fig. N).
15. Use four M4 x 10 screws (Part 22)
to attach the magnets (Part 20) to the
front frame (Part 2) (see Fig. 0).
Note:
The black plate of the magnet (Part 20)
should be facing the front.
16. Decide the height for the middle
shelf. Place the hooks (Part 26) into the
hook slots and push them down. Place
the middle shelf (Part 9) into the cabinet
at the decided height and push it down
(see Fig. P).
Note:
The middle shelf needs hooks at four
corners for support. Make sure the hooks are
placed at the same height.
headline bars headline bars headline bars headline bars
Fig. M
continuation tabs continuation tabs continuation tabs continuation tabs
Fig. N
notes notes
notes notes
Fig. O
warnings warnings
warnings warnings
Fig. P