MasterCraft 068-0558-4 Guide D'utilisation page 11

17. Attach the left door (Part 5) to the
unit. Insert four M4 x 8 screws (Part 23)
into the left door and tighten them using
the screwdriver (Part 21) (see Fig. Q).
18. Attach the right door (Part 8) to the
unit. Insert four M4 x 8 screws (Part 23)
into the right door and tighten them using
the screwdriver (Part 21) (see Fig R).
Note:
The screw holes on the door hinge have
some tolerance, thereby enabling the door to be
adjusted and centred on the door frame.
19. Use eight M4 x 10 screws (Part 22) to
attach the push bar (Part 29) to the
drawer cabinet (see Fig. S).
20. Attach corner protector B (Part 31) to
the back left of the drawer cabinet using
five M4 x 10 screws (Part 22) and attach
corner protector A (Part 30) to the back
right of the drawer cabinet using five M4
x 10 screws (Part 22) (see Fig. T).
Fig. Q
Fig. R
Fig. S
Fig. T
9