Switching On The Appliance; Selecting The Temperature; Button Lock; Warning Signal - Siemens KSW Serie Notice D'utilisation Et De Montage

en
Switching on
the appliance
Press the main switch, Fig. !/1. The ap­
pliance starts refrigerating.
The factory has preset the upper chilling
zone with a basic setting of +18 °C and
the lower chilling zone with a basic set­
ting of +10 °C.
Selecting the
temperature
The set values can be changed, see De­
scription of control panel.

Button lock

Fig. !
The button lock prevents the appliance
from being switched off unintentionally
and the temperature from being
changed.
Switching button lock on and
off
Simultaneously press buttons Æ and Ç
for 3 seconds to switch the button lock
on.
˜©¥ is displayed.
Simultaneously press buttons Æ and Ç
for 3 seconds again to switch the button
lock off.
˜©Ÿ is displayed.
20

Warning signal

The door warning signal
If the appliance door is open for longer
than two minutes, the door warning
signal sounds and š©§ is indicated on
the display panel. Close the door to
switch off the warning signal.
Temperature warning signal
If the temperature drops more than 2 °C
below the set temperature for longer
than 60 minutes, Lta/actual temperature
(low temperature alarm) is indicated on
the temperature display and an alarm
sounds.
If the temperature rises more than 5 °C
above the set temperature for longer
than 60 minutes, Hta/actual temperature
(high temperature alarm) is indicated on
the temperature display and an alarm
sounds.
The acoustic and optical signals may be
actuated without risk to the refrigerated
food:
90 minutes after the appliance was
n
switched on.
When large quantities of fresh food are
n
placed in the appliance.
The alarm automatically ends when the
set temperature has been restored in
the cabinet.
Press any button to switch off the
warning signal.
Caution:
Very low temperatures will prevent the
wine from maturing.