Philips Sonicare DailyClean 3100 2 Serie Mode D'emploi page 13

Easy-start
The Easy-start feature gently increases power over the first
14 brushings to help you get used to brushing with the Philips
Sonicare toothbrush. This Philips Sonicare toothbrush comes with the
Easy-start feature activated.
Activating or deactivating the Easy-start feature:
Place the handle in the plugged-in charger.
-
To activate Easy-start:
Press and hold the power on/off button for 2 seconds.
You hear 2 beeps and the battery level indicator lights up green to
indicate that the Easy-start feature has been activated.
-
To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds.
You hear 1 beep and the battery level indicator lights up yellow to
indicate that the Easy-start feature has been deactivated.
Note: Each of the first 14 brushings must last at least 1 minute to move
through the Easy-start ramp-up cycle properly.
Note: Use of the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces the effectiveness of the Philips
Sonicare toothbrush in removing plaque.
Quadpacer
-
The Quadpacer is an interval timer that has a short beep and
pause to remind you to brush the 4 sections of your mouth evenly
and thoroughly. This Philips Sonicare toothbrush comes with the
Quadpacer feature activated (Fig. 10).
35_021_1325_1_DFU_BookletSimp_A6_v1.indd 13
13
English
23/12/15 11:28