Unpack, Connect And Go; Technical Details; How To Connect Your Z21 Digital System - Roco and Fleischmann z21 XL Serie Mode D'emploi

Quick Start Guide

Technical details:

Input voltage
12-24 V
Rail voltage
Rail voltage lies 1 V below input
voltage
Max. output current
6 A
Short-circuit/overload
shutdown
Yes, at over 6 A
Digital system
DCC, MM, RailCom ®
Analogue locomotives
Cannot be controlled
Dimensions
207 mm x 146 mm x 37 mm
34

1. Unpack, Connect and Go

This manual shows you how to operate your Z21 Digital System and control your layout using the Z21 app.
Please prepare the following items:
▶ the Z21 XL Series and the supplied AC adaptor
▶ the supplied WLAN router and the supplied AC adaptor
▶ the supplied network cable
▶ your smartphone or tablet PC with Internet access, optionally or additionally the MULTIMAUS (Art. No.
10810), Z21WLANMAUS (Art. No. 10813)

1.1 How to Connect Your Z21 Digital System

1. Place the Z21 XL Series into your system for good accessibility.
2. Connect the supplied clamping terminal to the powered track. Ensure good contact. The Z21 XL series
has been developed exclusively for dry interior spaces. For this reason, do not operate the Z21 XL series
in areas subject to major temperature and air humidity fluctuations.
The Z21 XL series should never be placed close to strong sources of heat such as radiators or places
subject to direct sunlight.
2. Use connection lines with 0.75mm² to 1.5mm² (AWG18 - AWG16). Plug the cable of your powered track
into the track socket "Main Track" of the Z21 XL Serie.
3. Connect the switching adaptor to the DC power socket "DC Power".
4. Connect the switching adaptor of the Z21 XL Series to the mains power outlet.