Programming Track - Roco and Fleischmann z21 XL Serie Mode D'emploi

Digital centre
Note: The firmware of your Zimo loco
decoder can be updated very conve-
niently via the programming track.
To do this, use the Z21 Maintenance
Tool. You can download it here:
www.z21.eu/en/downloads/software-
tools
Warning: Only one loco can be on the
programming track at a time.
Note: When setting the length of the
programming track, take the longer
tenders of steam locomotives into
account!
42

2.7 Programming Track

You can use any partial section of your layout as a programming track – simply isolate it on both ends with
insulated rail connectors (Art. Nos. 42611, 61192, 6433 or 9403) or separator rails and then connect it to a
power supply element (Art. No. 61190) at the "Prog Track" socket of the Digital Centre.
To program a loco, simply drive it to the corresponding track section. Then change your Z21 App to program-
ming mode for details, see www.z21.eu/en/z21-system/z21-app/tutorials.
The Z21 XL Series now switches the track automatically into programming mode.