Legal Notice - Roco and Fleischmann z21 XL Serie Mode D'emploi

Legal Notice

30
Legal Notice
Please note the following cautions before using your Z21 Digital System:
▶ When combining ROCO or FLEISCHMANN components with third-party products, the warranty for
damage or malfunctions lapses.
▶ Any warranty claim lapses if the casings of the Z21 XL Series and Router are opened.
▶ Carry out all cabling works only when the power is switched off!
▶ Work carefully and make sure that no shortcircuits can occur when connecting the track system to the
mains! Incorrect wiring can destroy the digital components. If necessary, consult your dealer.
▶ Positively do not connect an analogue transformer or other digital systems or centres to the same
power circuit or neighbouring power circuits in parallel to digital control. This can result in the destruc-
tion of the Z21 XL Series!
▶ Do not use the 10870 Z21 Z21 XL Series if the mains plug, mains cable or the device itself is faulty or
damaged.
▶ The 10870 Z21 XL series may heat up during operation. Observe an adequate distance from
adjacent parts to ensure sufficient ventilation and cooling of the device.
▶ The Z21 XL series should only be used for the large gauges 0, 1 and 2.