Reversing The Opening Direction Of The Door - essentiel b ERDV165-55b2 Notice D'utilisation

Reversing the opening direction of the doors
If necessary, you can change the direction that your refrigerator doors open. To make
these changes, remove all shelves from inside the appliance and from the doors, the
fruit and vegetable compartment and all accessories, then proceed in order as shown
below or contact a qualified professional.
IMPORTANT:
Unplug the appliance from the electrical outlet when reversing the direction that
the doors open.
Tools required:
Flat head screwdriver
Tournevis à tête plate

Reversing the opening direction of the door

1. Remove the screw cover (A) from the freezer door, located on the top of the
appliance, then unscrew the screw (B) and the top right hinge (C). Using a flat-blade
screwdriver, remove the hole cover (D) on the top left of the appliance.
2. While holding the freezer door to prevent it from falling out, unscrew the hex screws
(E) securing the top hinge (C).
8 mm socket spanner
Clé à douille 8 mm
Adjustable spanner 8 mm spanner
Clé anglaise
Phillips screwdriver
Tournevis cruciforme
Clé 8 mm
(A) Screw cover
(A) Cache-vis
(B) Screws
(B) Vis
(C) Upper hinge (C) Charnière supérieure
(D) Hole covers
(D) Cache-trous
31