essentiel b ERDV165-55b2 Notice D'utilisation page 27

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

installation of your new appliance
Please read the following tips before using your appliance for the first time.
WARNING!
For proper installation, the refrigerator should be placed on a flat and stable surface.
This surface must be strong enough to support a fully loaded refrigerator.
The adjustable feet are not casters and should only be used to move the appliance
forwards and backwards. Moving the refrigerator sideways can damage the floor and
the adjustable feet.
Ventilation of the appliance
To improve the efficiency of the cooling system and save energy, you must leave
enough ventilation space around the appliance to dissipate heat generated by it. Leave
sufficient space around the refrigerator: It is recommended to leave at least 50-70 mm
between the wall and the back of the appliance, 100 mm above and to the sides, and
sufficient space in front to allow the door to open to 135 degrees, as shown below:
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Erdv165-55s3

Table des Matières