Publicité
Les langues disponibles
Les langues disponibles
using the appliance
Before plugging the appliance into the mains
socket for the first time, leave it to stand for two
hours if it has been transported in the upright
position, or 24 hours if it has been transported
horizontally; this allows the refrigerant gas to
flow back into the compressor. Failure to do
so could damage the compressor.
Switching on
•
Plug the appliance into an easily accessible, earthed mains outlet. The control panel
lights up for a few seconds and a beep sounds.
•
When you open the refrigerator and/or freezer door, the interior lighting of the refrigerator
and/or freezer comes on.
Description of the control panel
The control panel is located on the front of the refrigerator door.
34
V.1.0
using the appliance
1
2
8
10
1.
Display screen
2.
Freezer compartment control
3.
Refrigerator compartment control
4.
Setpoint temperature display
5.
"Smart" function
6.
(Appliance equipped with an inverter
compressor)
7.
"Fast freeze" function
8.
Select temperature setting zone
(refrigerator or freezer)
3
4
5
6
7
9
11
12
9.
Select temperature
10.
Select mode ("Smart" or "Fast freeze")
11.
Confirm temperature or mode selection
12.
Lock/unlock the control panel
V.1.0
using the appliance
35
Publicité
Chapitres
Dépannage
