3
Place the TV set on the Table-Top Stand.
4
Attach the Table-Top Stand using the screws
previously removed in step 2 of Detaching
the Floor Stand from the TV (page 8).
Screw (M5 × 20)
5
Attach the Short Neck Covers to the Table-
Top Stand.
~
• Ensure that there are no objects in front of the
TV.
10
GB
Table-Top Stand
Short Neck Covers
IR Sensor
2: Adjusting the
Speakers angle
To access the terminals on the rear of the TV
when it is mounted to a wall, adjust the Speakers
angle by loosening the screw as indicated in the
illustration.
* Make sure the screw is tightened back after adjust the
Speakers to the original angle.
*