2: Adjusting The Speakers Angle - Sony Bravia XBR-84X900 Mode D'emploi

4
Attach the Table-Top Stand using the
screws previously removed in step 2 of
"Detaching the Floor Stand from the TV"
(page 17).
Screw (M5 × 20)
5
Attach the Short Neck Covers to the
Table-Top Stand.
20 US
Short Neck Covers
2: Adjusting the
Speakers angle
To access the terminals on the rear of the TV
when it is mounted to a wall, adjust the
Speakers angle by loosening the screw as
indicated in the illustration.
* Make sure the screw is tightened back after adjust
the Speakers to the original angle.
*