Shaper Origin S01-EN Guide D'utilisation page 15

Safety & Care Safety & Care
Use an appropriate spindle speed setting for
your material. Different materials and router bits
call for different spindle speeds. Faster is not
always better. Visit support.shapertools.com for
recommendations on spindle speed settings to
use with various materials and router bits.
Never operate Origin in a situation in which it
could come in contact with its own cord.
Use Origin with a dust extraction system. Origin
is designed to be used with a dust extraction
system at all times. Connect to a dust extractor
using an appropriately-sized hose or the hose
provided with Origin. For recommendations on
dust extractors visit support.shapertools.com.
Always operate Origin on a horizontal surface,
it is not intended to be used on a wall. Use of
Save all warnings and instructions
Origin on a non-horizontal surface may result in
for future reference.
personal Injury.
Before performing a cut always make sure that
you have initiated a bit touch-off. Calibrating the
Z-Height of the router bit ensures that it does not
accidentally plunge into and damage the material
underneath your workpiece.
Unplug Origin's plug from the power receptacle
in the wall to completely remove power supplied
to the tool. The spindle power switch removes
power supplied to the spindle only. The OFF
switch position does not remove power supplied
to the non-spindle portions of Origin.
Origin is a class I tool with double insulation
and/or reinforced insulation throughout.
Origin includes a earthing connection used for
functional grounding purposes.
20 shapertools.com 21