Reset; Keyboard Locking; Pin Code; Other Informations - Watts Vision BT-D03 RF Manuel D'utilisation

ENGLISH
When an opened window is detected, the
thermostat applies to heating system anti-
freeze temperature set point. User can
restart heating system, and stops window
detection by pressing on a key.

6.4 Reset

By holding the button on the back of ther-
mostat, user can:
- Unlock pin code
- Go directly to pairing menu (5 seconds)
- Reset thermostat with user parameter
value equal to factory setting. (10 sec-
onds).

6.5 Keyboard locking

Wake-up the thermostat (lighted back-
light),
Press and hold
ously.
Once locking is activated, logo
on the LCD screen:
BT-D03-MOI-FR-W-EN-06-21
EN
5/10 Seconds
and keys simultane-
appears

6.6 PIN code

To activate this function enter user param-
eter 10.
The PIN code protect the thermostat from
any change of the setting as temperature
or mode.
When user pushes a key, "PIN" will be dis-
played. If user press another time a touch,
he has to enter PIN number.

6.7 Other informations

6.7.1 Heating and cooling indications

Logos used to indicate than system
requires:
heating is ; cooling is

6.7.2 LED indication

When user modify set point temperature in
functioning mode, behavior information is
displayed with a LED RGB located on the
middle of validation key.
Blue Azure Green
<18°C <20°C <22°C <24°C
6.7.3 Wireless communication
functioning
When digital thermostat sends an RF
frame, LCD logo
sion.
RF frame is sent:
- When user press any key of the thermo-
stat.
- When user press key in Central Touch
screen to update the thermostat.
- Automatically every 3-4 minutes.
.
Yellow Red
<37°C
blinks during transmis-
11