Watts Vision BT-D03 RF Manuel D'utilisation page 14

14
Setting value for PIN code:
User has to configure values of the three digits with and
validate its choice with validation key.
Factory setting value: 000
Reset user settings:
Press and hold
up, showing that the thermostat has been reset with the
factory default setting:
➤ Set point temperatures in
➤ All user parameters with their factory values.
When button is hold:
holding
button
Zone number displaying:
This function is available only if digital thermostat is associ-
ated with a multi-zone receiver.
Displaying client software version:
Pressing and maintaining key
cation version and debug information.
Reminder: software version is written: Vxx.xx.
Professional menu:
This menu permits to access to installer parameter menus.
Pressing and maintaining key
installer menus.
When button is hold:
holding
button
User menu exit:
Press key to exit user menu and return to the main
screen.
Value range: 000 to 999
for 5 seconds to reset, all segments light
Clearing user parameters
holding
button
displays software qualifi-
displays first parameter of
Accessing to installer parameters
holding
button
ENGLISH
EN
modes,
Clearing
is done
releasing
button
Installer
parameters
releasing
button
BT-D03-MOI-FR-W-EN-06-21