Reversible Mode; Opened Windows Detection - Watts Vision BT-D03 RF Manuel D'utilisation

6.2 Reversible mode

Reversible menu access is only pos-
sible on two conditions:
- thermostat isn't associated to a touch
screen or 6Z master
- « reversible menu » is activated in the
user parameter menu.
Enter user parameter 08, use keys
and , to select operating mode of the
thermostat:
- Hot: Heating regulation mode
- CLd: Cooling regulation mode
- rEv: activation of reversible mode in
menu
- Aut: automatic Heat/Cool mode.
Pressing key
and switches to comfort mode.
A user inactivity of some seconds con-
firms cur- rent selection and returns to old
selected mode.
By pressing key, temperature set point
value is validated.
Once the reversible mode has been selec-
ted, the change of mode is made as
follows:
Press 2s on to access the menu mode
selection menu. Then go down below
the OFF mode until the 4 blank icons are
displayed:
10
confirms the selection
Select with then select the «Hot» hea-
ting mode or «Cld cooling mode using
and keys.
Reversible menu
Cooling
mode
Heating
mode
Pressing the key for 1s confirms the
mode selection.
User inactivity of a few seconds keeps the
thermostat in the previous mode.

6.3 Opened windows detection

Enter user parameter 07.
When activated and a detection is run-
ning, the icon
on the screen!; This function is done by
measuring and recording the temperature
evolution.
ENGLISH
EN
automatic
return
Back to
previous
mode
1 seconde
Navigation
menu
will appear and blink
BT-D03-MOI-FR-W-EN-06-21