Troubleshooting; Corrective Action - Kobalt SGY-CMI Mode D'emploi

TROUBLESHOOTING

PROBLEM
1. Motor overloaded.
Motor trips
2. Extension cord too long.
out repeatedly.
3. Extension cord too light
Mixer is
1. Disconnected plug.
plugged in
but does not
3. Defective motor.
start (motor is
4. Loose connection in motor.
not humming).
1. Starting under too much load.
Motor is
humming.
In the event of the motor overheating, and your motor shuts down, turn the power switch to the
"O" position and unplug the unit for 15 minutes. Empty the mixer. After the cooling period,
plug in the unit, then turn the switch to the on position. Let mixer start running. Once running
properly, refill mixer.
PROBABLE CAUSE
a gauge.
2. Corroded plug.
2. Motor too cold.

CORRECTIVE ACTION

1. Empty mixer.
2. Refer to power cord safety (page 6).
3. Refer to power cord safety (page 6).
1. Connect plug to outlet.
2. Clean prongs.
3. Contact customer service.
4. Unplug motor, open motor cover,
and check connections.
1. Empty load, start mixer empty,
refill mixer.
2. Motor will not start properly below
32°F.
11
Printed in China