Dmx Linking; Starting Address - Chauvet DJ GigBAR Flex Guide De Référence Rapide

M
ODE
General
COLOR
Setting
DMX Mode
d001–d512
Setting
Master/Slave
Setting
System
Options

DMX Linking

The GigBAR Flex can work with a DMX controller. Instructions for connecting and configuring this product
for DMX operation are in the User Manual. If you are not familiar with DMX or DIP-switch configuration,
download the DMX Primer from www.chauvetdj.com.

Starting Address

To ensure full access to the two channels available in DMX mode, the highest recommended DMX address
is 510.
Master/Slave Connection
The GigBAR Flex uses the DMX data connection for its Master/Slave mode. Instructions for connecting
and configuring this product for Master/Slave operation are in the User Manual.
GigBAR Flex QRG Rev. 1
QUICK REFERENCE GUIDE
P L
ROGRAMMING
CoLo
Slav
dSET
Sys
WiFi
EVELS
Sets both Par and
R000–R255
Derby red values
Sets both Par and
G000–G255 Derby green
values
Sets both Par and
B000–B255
Derby blue values
Sets the UV
U000–U255 values for the Par
and strobes
3 CH Sets DMX starting address;
selects the DMX personality DMX
8 CH
range restricted by number of
channels in the selected DMX
20 CH
mode
Sets to Slave mode
1234 Changes arrangement of pods
rSEt Resets to factory defaults
on
Turns on/off Wi-Fi antenna for
wireless footswitch
off
EN
D
ESCRIPTION
Note: ONLY
3 of the 4
colors may
be used at
the same
time.
5