Brandt BFL862YNW Manuel D'instructions page 49

When super mode is selected, super mode icon will light on, and display
window will show 2° C.
In super mode, touching "FRIDGE" button, super mode icon will flash 3
times, but fridge temperature can not be changed.
To exit Super mode,
- Press "SUPER" button to deselect Super mode,
- Or after 3 hours of super mode without any operation, the refrigerator will
automatically stop it and enter to previous setting.
Warning:
In super mode, noise of the appliance may be slightly higher than normal
running.
2.3 ALARM/VACATION: Clear door opening alarm, select and deselect
vacation mode
Short touching "ALARM/VACATION" button to clear door opening alarm.
Touching "ALARM/VACATION" button for 3 seconds to select vacation
mode. After 5 seconds flashing of vacation mode icon, vacation mode is
selected.
When vacation mode is selected, vacation mode icon will light on, and
display window will show 17° C.
In vacation mode, "FRIDGE" button will not respond to any touching.
Short touching "SUPER" button can exit vacation mode and enter super
mode.
Touching "ALARM/VACATION" button for 3 seconds to deselect vacation
mode.
2.4 LOCK: Locking and unlocking
Touching "LOCK" button for 3 seconds to lock the control panel, then the
locking and unlocking icon will be "
In locking status, touch any button, the locking and unlocking icon will flash 3
times.
Touching "LOCK" button for 3 seconds to unlock the control panel, then the
locking and unlocking icon will be "
In unlocking status, all buttons are available.
If no operation in 25 seconds, the control panel will be locked automatically.
".
".
49