Brandt BFL862YNW Manuel D'instructions page 38

Your appliance complies with the
European directives and their
amendments.
ENERGY-SAVING MEASURES
In order to reduce the power
consumption of your appliance:
• Install it in a suitable location
(see "Installing your appliance").
• Leave the doors open for the
shortest time possible.
•
Never put hot food in the
fridge or the freezer, and in
particular soups
preparations that release a lot of
steam.
• Check that your appliance is
working correctly and do not
allow too
accumulate
(defrost when the ice is more
than 5-6 mm thick). Clean the
condenser on a regular basis
(see chapter
maintenance
appliance").
• Regularly check the door seals
and make sure that the doors
can be closed properly. If this is
not the case, contact after-sales
service.
• Do not adjust the temperature
too low.
Failure to install the draws,bins
•
and shelves properly can result
in increased power consumption.
and other
much ice
in the freezer
"Routine
of your
Warning
If your transported the appliance
horizontally, position it vertically
and wait for 2 hours before
connecting it. A little oil may flow
into
enough time for the oil to return
to the motor before connecting
the appliance, failing which, it
could be
Always unplug your appliance
before any maintenance work.
Never pull on the power cord, but
only on the plug itself.
CLEANING
MAINTENANCE

appliance
maintenance operations.

with metal objects, steam
to
systems, volatile oils, organic
solvents
components.

Do not use sharp or cutting
objects
to remove the ice. Use a plastic
sponge.

"Maintenance" chapter in this
manual to replace the light
bulb.
using,
There are flammable materials at
the back of the appliance. Pay
attention to the symbol "Risk of
fire – flammable material" which
is located
appliance.
38
thecooling circuit.
Always switch
before
Never clean the appliance
or
Refer to
WARNING!
keep the product far
away fire source during
service and
on rear
Allow
AND
off the
any
abrasive
the
Please
disposal.
of the