Light Replacement; Circuit Diagram - Wine Cell'R WC-45 Manuel De L'utilisateur

• How to fit my bottles? look at this diagram for proper positioning:
Important note:
Because of refrigerant circulation in the evaporator, a common sound similar to running
water may sometimes be heard when the compressor is working. this is normal.
there could also be a pit-a-pat sound when operation starts or stops. this is also normal.

9. liGHt rePlaCement

Before removing the inner light, turn off the wine cellar first and then unplug the unit
form the wall outlet. Failure to do so could result in electrical shock or personal injury.
• use a screwdriver to remove the screw.
• remove the transparent light cover by pulling downwards gently.
• Pull out the connectors and remove the led board.
• replace with a new led board that is the same shape and size.
• replace the transparent light cover and tighten the screw.

10. CirCuit diaGram

05m1_manuel_WC-45_11477.indd 7
7
17/08/11 4:03 PM