Setting The Date And Time - Biosynex MedicAid 858754 Manuel

SETTING THE DATE AND TIME

You must set the device's date and time before the rst use and each time the batteries are replaced
1. When the device is turned off (blank screen) or after replacing the batteries, press and release the «Date
and time» button; «year» will begin to ash on the screen.
2. Press the «MEMORY» button to display the desired year, press on «POWER» to con rm the «Year».
3. The «Month» will ash next. Repeat steps 1 and 2 to set the «Month» and the «Date», then «Hour», then
«Minute».
4. After setting the minute, the device will automatically exit the date/time setting and quickly show the word
OFF before turning off.
Notice-Medicaid-tensio-858754-v1-042017-r1.indd 28
Press the «Date and
time» button
Year
Press the «POWER»
button
Time
Press the «POWER»
button
Month
Press the «POWER»
button
Minute
28
Press the «POWER»
button
Date
Press the «POWER»
button
OFF
18/04/2017 15:24:36